Whether you woke up to a sweltering house or want to plan a system replacement before the old unit fails, our technicians provide dependable HVAC care for your home.
Your HVAC system touches everything in your home, sleep, comfort, air quality, energy bills, and a failing unit disrupts all of it. Kent HVAC keeps Kent homeowners covered with complete residential service: repairs, replacements, new installations, and seasonal maintenance.
From AC replacements and furnace installs to seasonal tune-ups, we handle it all with honest pricing and lasting results.
High-efficiency furnaces sized for your home and vented correctly.
Heating and cooling repairs on every major brand, most finished in one visit.
Heat pumps sized for your climate, with backup heat set up correctly.
System replacements with proper sizing and a full commissioning test.
Dust, odors, and weak airflow traced back to the ductwork and fixed.
Cold air back fast, with the common parts already on the truck.
Coils cleaned, charge checked, safeties tested, twice a year.
No-heat calls handled fast, with a safety check on every visit.
Complete heating and cooling systems designed around your home's actual load.
Mini-splits for the rooms that never get comfortable.
Gas and electric furnace repairs with combustion and safety checks included.
Central air installs with the charge, airflow, and drainage verified.
Our experienced technicians handle every home heating and cooling problem, big or small.
Call (253) 660-4929 Today
Many homeowners only think about their HVAC system when it stops working, and by then comfort is already gone. Kent HVAC takes a different approach. We respond fast, pin down the failed part, explain what we found in plain language, and make the repair with the right parts on the truck.
From capacitors and contactors to blower motors, igniters, and flame sensors, our team repairs every residential heating and cooling failure with expertise and care.
No homeowner likes surprises on the final bill. So Kent HVAC prices every Kent job before the work begins, after a full diagnostic that looks at the equipment's age, fuel type, and tonnage, refrigerant levels, coil and heat exchanger condition, and the ductwork feeding each room. You'll know the problem, what the fix involves, and exactly what it will cost before you say yes.
The problem with HVAC failures is that most of them develop out of sight. A pinhole leak in the evaporator coil slowly drains refrigerant, the blower bearings wear down gradually, and a weak capacitor lasts right up until the first hot afternoon, when the compressor won't start. If your bills are climbing, airflow drops, or ice forms on the lines, get it looked at while it's still a simple repair.
Not every call is an emergency. Plenty of Kent homeowners call us to size up an aging system before it fails, and it's a smart move. With a typical AC or furnace lifespan of 12 to 18 years, a replacement on your own timeline beats scrambling for a new unit during a cold snap. We'll give you an honest read on how much life your equipment has left.
Seasonal Tune-UpsA Kent HVAC maintenance visit is more than a filter change. The technician cleans the coils, verifies the refrigerant charge, tests capacitors and contactors, inspects the burners and heat exchanger, clears the condensate drain, replaces the filter, and checks static pressure in the duct system. Small problems get caught while they're still cheap to fix, and your system stays running at full efficiency.
We offer flexible maintenance options for homeowners, with spring cooling tune-ups and fall heating tune-ups for most systems. This is especially important in dusty areas, where dirty condenser coils choke heat rejection and drive up energy use. Each home is assessed individually, and the plan is tailored to your equipment's age, your household's comfort demands, and your local climate.
Homeowners are often surprised how much a regular maintenance schedule cuts operating costs. A clean coil transfers heat far more efficiently, a properly charged system stops overworking the compressor, and a fresh filter protects the blower motor. Most families find that a maintenance plan costs far less than replacing an HVAC system even one year early.
Right-Sized SystemsWhen it comes to HVAC, bigger is not better. An oversized unit turns on and off too often, burns extra energy, and never runs long enough to pull humidity out of the air, while an undersized one runs nonstop and still falls behind on the hottest afternoons. We don't simply copy the tonnage of the old unit. Instead, we run a proper load calculation using your square footage, insulation, windows, and ductwork, and for mini-splits we size each head to the room it serves.
Homes change over time. An addition or a finished basement can outgrow the single-stage system that used to be plenty. Modern two-stage and variable-speed heat pumps hold tighter temperatures and use far less energy. Whether you're comparing a heat pump and a furnace-and-AC pair, or ducted and ductless, we'll explain the honest pros and cons in SEER2 ratings, operating cost, electrical and venting needs, and installation work.
Common ProblemsHomes in Kent run into a familiar set of heating and cooling failures, and each one calls for a different fix. Kent HVAC handles them all: no cooling, air that blows but never gets cold, furnaces that won't ignite or short-cycle, frozen evaporator coils, refrigerant leaks, condensers that hum without starting, thermostats that lose their settings, clogged condensate drains, and mini-splits flashing error codes. Our technicians identify the exact fault and target the repair to the component that actually failed.
The right repair depends entirely on what actually failed. On cooling systems, that usually means a capacitor, contactor, or fan motor. On furnaces, it tends to be an igniter, flame sensor, or control board. Leaking ductwork pushing conditioned air into the attic is sealed and repaired, and we recover and recharge the refrigerant once the leak itself is repaired. A few of these problems are simply a nuisance, but a cracked heat exchanger or a clogged condensate drain can be a genuine safety or water-damage risk, so we treat it with urgency.
Our experienced technicians find and fix heating and cooling problems at the source. Early action protects your home and saves money.
Get Help: (253) 660-4929When the AC dies in the middle of a heat wave or the furnace quits on the coldest night of the year, you need help now, not next week. Kent HVAC provides same-day and emergency HVAC service for Kent homeowners, with quick response times. Our technicians arrive fully equipped to diagnose the fault, make the repair, or, when a system is beyond saving, get a properly sized replacement installed quickly.
You get the price before any work begins, and there are no hidden fees. Once the job is done, the technician walks you through what was wrong, what was repaired, and how to keep your equipment healthy going forward.
Done RightA repair that only treats the symptom sets up the next breakdown. So our technicians dig past the failed part to the conditions behind it: restricted airflow, undersized ductwork, or shortcuts from the original installation. Correct those, and the problem is far less likely to come back. As a local, family-owned company, we treat every Kent home like a neighbor's.
Our process is simple and proven: a thorough inspection, a clear recommendation, professional repair or installation, and honest guidance on maintenance. We handle everything from start to finish so you and your family can count on dependable comfort every day. For year-round peace of mind, ask about our seasonal maintenance plans that keep your heating and cooling covered through every season.
Call Kent HVAC for fast, professional residential heating and cooling service throughout Kent.
Call (253) 660-4929 Today